The One-Stop Customized Decor Panel Solution​

---

​Application
VIVID High Gloss Acrylic Panel

Achieve a modern look in your kitchen with the Vivid High Gloss Acrylic Panel from Eligere. Each panel is crafted with a seamless edge that showcases the versatility and sophistication of the acrylic panel, making them perfect for modern homes.

Use these panels on surfaces such as kitchen cabinets, wardrobes or any furniture for a sleek and polished look.

Normally achieving a high class gloss finishing means high costs and an even higher maintenance. This stops with Vivid High Gloss Acrylic Panel.

With easier handling, there is huge potential to rethink exclusive high gloss finishes that are so prevalent in both high-end retail, hospitality setting and furniture designs. It is now time to think beyond what was once impossible.

Possible application areas:

• Built-in furniture door fronts
• Sliding door​

​

Low Formaldehyde

Ultra High Gloss

Seamless Edge

PUR Adhesive Lamination

---

​Colour Selection
VIVID High Gloss Acrylic Panel

Neutral colours, the classic for a timeless design, have gained even more popularity over the past years. At the same time, nature and authenticity are in demand. Grey tones are also becoming important, especially in combination with our Melame MFC / MFF Decor Panel.

Perfect glossy metal reproduction creates a modern and exciting element in interior design. In addition to classic metallic colours such as Metier, Maven and Aurum, neutral metallic colours such as Chalice is gaining importance as well.

​Vivid High Gloss Acrylic Panel allows kitchens to look sleek and clean, providing modern sensibility and emphasis on the dimensions of the area.

COLOUR collection

---

​Raw Material to Crafted Piece
VIVID High Gloss Acrylic Panel

The raw MDF (CARB P2, reduce formaldehyde​ emission) core board undergo a series of sanding processes to achieve optimal surface, in preparation for the lamination process.

Carefully-chosen premium imported extruded acrylic sheets delivers quality that is promised, and consistency in colours between batches.

​Utilises state-of-the-art PUR flat lamination line from Germany that promises consistency, PUR adhesive is applied to the core board's surface before the acrylic sheet comes in contact. ​

​All Vivid series comes in double-sided high gloss surface that increases the aesthetic look while minimising chances of warpage.

Panels are then sealed with closely-matched colour edgebands, attaining visually zero joint lines. The zero joint lines are achieved utilizing a special edgebanding tape that has a functional layer. This layer is fused to the substrate during the edgebanding process by means of thermal techniques. The edge is applied to the panel by interpenetration of the polymer into the panel fibres. As a result, visually zero joint lines between the panel and edgeband are achieved. The thermal edging techniques also further enhance the panel against water and moisture.

Our 4 key factors to achieve a good high gloss surface result:

• Achieve good surface quality of the core materials through sanding process.
• Imported high quality surface materials (acrylic sheet).

• Apply correct adhesive type (PUR) and in the right amount.
• Utilise flat lamination line from Germany for precision control. 

---